For projects around the house requiring an easy-to-use solution that’s super-strong and instantly bonds, seals, and repairs virtually everything, look no further, Flex Glue Easy Squeeze is here! Our new Easy Squeeze formula easily comes right out of the tube, ready to repair. There’s no need for screws or nails which can be an eyesore. Instead, rely on Flex Glue’s instant grab technology to make those repairs and projects easy to tackle. Whether your desired use is indoors or outdoors, Flex Glue Procomes in a cartridge that requires a caulk gun provides powerful adhesion within seconds of application.
Flex Glue EZ Squeeze and Flex Glue Pro are great for indoor and outdoor applications. They both can be applied to dry or wet surfaces and even work underwater! Watch the video above for a step by step guide, or read on for more tips and information.
1. Unscrew cap.
2. Cut off tip of nub, above threading.
3. Squeeze and apply to a surface free of dirt and oil.
1. Unscrew nozzle.
2. Cut off tip of nub, above threading.
3. Replace and cut nozzle, then load into caulk gun
4. Apply to a surface free of dirt and oil.
Please note that a caulk gun is required to use Flex Glue Pro. Flex Glue Easy Squeeze does not require a caulk gun.
Cut near the base of the nozzle.
Apply liberally to the side of the surface being bonded. Press firmly for a minimum of 10-30 seconds for the instant grab to take hold. If needed, reposition object within 10 minutes of application. Allow 12-24 hours for curing. Flex Glue will reach the maximum strength in 7 days.
When you are finished using Flex Glue Easy Squeeze, cut between the thread and the nozzle, dispense a small amount out of the end and allow it to dry to form a plug. This will prevent the remaining Flex Glue from drying out. When you are ready to use it again, simply remove the plug at the end.
WARNING: May cause an allergic skin reaction. Avoid contact with eyes and skin. Wear gloves and safety glasses. KEEP OUT OF REACH OF CHILDREN.